Siirry sisältöön

Martin THRILL Mini Profile

Super compact movinghead with 800lumen and 18W LED

Ei varastossa
Tuoteno: 943977


Imagine having the ability to integrate the moving beams of light, shine spotlights when and where you need them, or add the dramatic effect of colors and “gobos” flying around the audience during your live shows. Now you can with the THRILL Mini Profile, Martin professional’s smallest and most affordable moving head to date. THRILL Mini Profile has been designed to help DJs, musicians and entertainers take their performances to the next level–whether they’re in lounge bar or pub, to a wedding or high-energy dance floor.
The THRILL Mini Profile delivers super-sharp optics with over 800 lumens of output via an 18 watt white LED engine. Eight varied gobos and eight vibrant colors are available, with electronic strobe/dimming, manual focus and high-speed pan and tilt. The eye-catching effects can be synchronized to a music beat via audio trigger or run from the four pre-programmed shows. For more custom control options, it can also be operated via DMX.
Despite performing above its class, this ultra-compact fixture weighs only 4.3 kg (9.5 lb.), so it’s easy to transport and set up. Its lightweight design, rugged exterior, and compact form factor make THRILL Mini Profile the perfect fit for on-the-go entertainers, DJs, venues and home enthusiasts that require professional, lighting within their reach. 
18 W, white LED engine
Dynamic effects include electronic dimming and strobe
8 static gobos for mid-air break-ups and projections
8 vibrant dichroic color filters
Ultra-smooth and fast pan/tilt
Easy to operate standalone sound-activated and master/slave control methods
4 professionally pre-programmed shows
DMX operable for individualized control and design
Includes bracket for hanging or surface mount
Common IEC power mains inlet - mains cable included
Dynamic Effects
Color wheel: 8 colors plus open, variable and random rotation 
Static gobo wheel (stamped): 8 static gobos plus open, variable and random rotation 
Strobe: Variable from 3 - 20 Hz, pulse effects and random strobe 
Electronic dimming: 0 - 100%, four dimming curve options 
Pan: 540° 
Tilt: 230°
Control and Programming
Control options: DMX, 4 stand-alone shows, master/slave 
DMX channels: 10 
Stand-alone trigger: Sound-trigger, auto-run 
User Interface: Control panel with backlit LCD display 
DMX compliance: ANSI E1.11 - USITT DMX512-A
Light source: 18 W white LED engine 
Minimum LED lifetime: 50 000 hours (to >70% luminous output)
Beam angle: 14° 
Focus: Manual 
Color: Black 
Housing: High-impact flame-retardant thermoplastic on metal frame 
IP rating: IP 20
Orientation: Standing or hanging 
Mounting points: Bracket for single rigging clamp, M12 or ½” 
Location: Dry location only 
Minimum distance to illuminated surfaces: 200 mm (8 in.) 
Minimum distance to combustible materials: 100 mm (4 in.) 
Minimum clearance around fans and vents: 100 mm (4 in.)
AC power input: IEC male inlet, C14 
DMX data in/out: 3-pin and 5-pin locking XLR
AC power: 100-240 V nominal, 50/60 Hz 
Fuse: Fuse: T 2.0 A, 250 V
Typical Power and Current
120 V, 60 Hz: 52 W, 0.9 A 
230 V, 50 Hz: 50 W, 0.4 A 
Typical half-cycle RMS inrush current: 6.4 A 
Cooling: Forced air (temperature-regulated, low noise) 
Maximum ambient temperature (Ta max.): 40° C (104° F) 
Minimum ambient temperature (Ta min.): 0° C (32° F) 
Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 180 BTU/hr.
Length: 237 mm (9.3 in.) 
Width: 155 mm (6.1 in.) 
Height: 338 mm (13.3 in.) 
Height with hanging bracket: 362 mm (14.25 in.) 
Weight: 4.3 kg (9.5 lbs.)




Tuote on siirretty ostoskoriin