Siirry sisältöön

Showtec Galactic G300

SHOWTEC

300mW Green Laser, ILDA & DMX

300mW Green Laser, ILDA & DMX


• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• 2 Auto & Sound shows, 86 built-in patterns
• Runs pre-programmed shows from SD card
• 1G SD card included
• Same personality as B300 The Galactic G300 is a single 532nm green color laser. Green is the most impressive color for laser shows and because of the 300mW laser module this unit makes powerful beam shows. If you like to create a more impressive show you can combine the G300 with the Showtec B1000 (51331). Both units have the same functionality and personality which makes programming together very easy. It also has built-in laser shows and together with the master-slave function you can run an impressive laser show without any preparation. The Galactic B300 can be controlled by DMX or programmed with any laser software using the ILDA protocol. For rental solutions you can use the SD card slot to run pre-programmed shows without controller.

Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.

Power Input: AC 100-240V, 50/60Hz
Power Consumption: 38 Watt
Laser Color: Green 532nm
Laser Power: 300mW
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-40?
Control Modes: 2xAuto, 2xSound,
Master/Slave, DMX,
ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D
25 Pole
Safety Features: Key switch, Interlock,
Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2,
2007-03
Dimensions: 385 x 310 x 162 mm
(excl. bracket)
Weight: 8 kg
Accessories: 2 Keys, Interlock test
connector, 1G SD card

 

Varastossa. Toimitusaika n. 4-7 päivää
€955,00
€899,00
Tuoteno: 51332-H

Tuotetiedot


300mW Green Laser, ILDA & DMX


• Sealed Optics
• DMX & ILDA control
• 20K Scanner pair
• 2 Auto & Sound shows, 86 built-in patterns
• Runs pre-programmed shows from SD card
• 1G SD card included
• Same personality as B300 The Galactic G300 is a single 532nm green color laser. Green is the most impressive color for laser shows and because of the 300mW laser module this unit makes powerful beam shows. If you like to create a more impressive show you can combine the G300 with the Showtec B1000 (51331). Both units have the same functionality and personality which makes programming together very easy. It also has built-in laser shows and together with the master-slave function you can run an impressive laser show without any preparation. The Galactic B300 can be controlled by DMX or programmed with any laser software using the ILDA protocol. For rental solutions you can use the SD card slot to run pre-programmed shows without controller.

Attention, the laser only works when the interlock connector is connected with a remote interlock (ordercode 51316). You can test if the laser works properly with the included test connector. If you use the laser in public area's a remote interlock is necessary for safety regulations.

Power Input: AC 100-240V, 50/60Hz
Power Consumption: 38 Watt
Laser Color: Green 532nm
Laser Power: 300mW
Laser Modulation: TTL
Laser Class: 4
Scan Speed: 20K
Scan Angle: +/-40?
Control Modes: 2xAuto, 2xSound,
Master/Slave, DMX,
ILDA, SD-Card
Control Display: LCD
DMX Channels: 13
Data Connector: In/Out, XLR 3Pin & Sub-D
25 Pole
Safety Features: Key switch, Interlock,
Safety eye
Laser Safety: EN/IEC 60825-1 Ed 2,
2007-03
Dimensions: 385 x 310 x 162 mm
(excl. bracket)
Weight: 8 kg
Accessories: 2 Keys, Interlock test
connector, 1G SD card

 

logotypes-fi.png
 

 

Tuote on siirretty ostoskoriin