Siirry sisältöön

DAP Stage-Amp 2.6

2 x 1400W SMPS Power Amplifier

2 x 1400W SMPS Power Amplifier


• Rugged but lightweight steel housing (15Kg)
• Tour proof amplification quality
• 2 Ohm Stable
• Tight and high bass pressure
• Very reliable due to overdimensioned switching power supply • Professional switched mode power amplifier.
• Strong, rugged steel housing.
• Clear led indicators for status mode, signal input, protection, clip, overheat.

Stereo output power 8 Ohm: 800W (1)
Stereo output power 4 Ohm: 1300W (1)
Stereo output power 2 Ohm: 2000W (2)
Bridge output power 8 Ohm: 2600W (1)
Bridge output power 4 Ohm: 4100W (2)
Frequency response (8 Ohm): 20 Hz- 20 kHz,
+/- 0,5 dB
S/N Ratio: >90 dB
Input sensitivity: 0,775V/1,0V/1,4 V
THD+N (8 Ohm,
1 kHz)
¼ Output power: <0,07%
Damp. Fact. (8 Ohm, 1 kHz): >200
Amplifier: 3 steps Class H
Slewrate: 13V/uSec
Protection circuit: DC/Short circuit
/VHF/Temp
Cooling: Internal heatsink
with front to rear
air flow
Signal input connectors: XLR 3 pin,
male/female
Speaker output connectors: Binding post,
4 pole speakon
Dimensions (LxWxH): 483 x 500 x 89 mm
Weight: 15,0 kg (1)The output power is tested conform EIA Standard.(2)The output power is tested conform 1 kHz,
1 x THD, 40 mSec Burst
Tuote ei ole tilattavissa
€955,00 /kpl
Tuoteno: D4503-H

Tuotetiedot


2 x 1400W SMPS Power Amplifier


• Rugged but lightweight steel housing (15Kg)
• Tour proof amplification quality
• 2 Ohm Stable
• Tight and high bass pressure
• Very reliable due to overdimensioned switching power supply • Professional switched mode power amplifier.
• Strong, rugged steel housing.
• Clear led indicators for status mode, signal input, protection, clip, overheat.

Stereo output power 8 Ohm: 800W (1)
Stereo output power 4 Ohm: 1300W (1)
Stereo output power 2 Ohm: 2000W (2)
Bridge output power 8 Ohm: 2600W (1)
Bridge output power 4 Ohm: 4100W (2)
Frequency response (8 Ohm): 20 Hz- 20 kHz,
+/- 0,5 dB
S/N Ratio: >90 dB
Input sensitivity: 0,775V/1,0V/1,4 V
THD+N (8 Ohm,
1 kHz)
¼ Output power: <0,07%
Damp. Fact. (8 Ohm, 1 kHz): >200
Amplifier: 3 steps Class H
Slewrate: 13V/uSec
Protection circuit: DC/Short circuit
/VHF/Temp
Cooling: Internal heatsink
with front to rear
air flow
Signal input connectors: XLR 3 pin,
male/female
Speaker output connectors: Binding post,
4 pole speakon
Dimensions (LxWxH): 483 x 500 x 89 mm
Weight: 15,0 kg (1)The output power is tested conform EIA Standard.(2)The output power is tested conform 1 kHz,
1 x THD, 40 mSec Burst

logotypes-fi.png
 

 

Tuote on siirretty ostoskoriin