Siirry sisältöön

LD Systems SAT 262 G2


2 x 6.5" passive Installation Speaker black

Tuote ei ole tilattavissa
€293,00 /kpl
Tuoteno: 944185


With its slim, streamlined design, the LD Systems SAT 262 G2 is excellently suited for permanent installation and discreet integration in virtually any setting. It features two 6.5" custom woofers and a 1” Celestion compression driver connected to a rotating CD horn with 80° x 60° dispersion. This makes the passive 2-way speaker ideal for both vertical and horizontal use.
The SAT 262 G2 attains a maximum sound-level pressure of 116 dB over a frequency response curve of 65–19 kHz with a permanent load capacity of 180 watts. The reflex casing made of 12 mm MDF has four M8 mounting holes. The inputs are a speakON-compatible socket and a terminal block, while an additional terminal block serves as an output for convenient parallel connection.
Special wall holders are available as an accessory to facilitate wall mounting. The SAT 262 G2 is available in black (Art. No. LDSAT262G2) or white textured finish (Art. No. LDSAT262G2W).

Type: Wall-mounted Loudspeaker
Low/mid driver dimensions: 2 x 6.5 "
Woofer size: 2 x 165.1 mm
Woofer magnet: Ferrite
Woofer brand: Custom-made
Woofer voice coil (mm): 38.1 mm
Horn: CD horn
HF driver dimensions: 1 "
HF Driver Size: 25.4 mm
HF driver magnet: Ferrite
HF driver brand: Celestion
HF driver voice coil: 1 "
HF Driver Voice Coil: 25.4 mm
Dispersion (H x V): 80 x 60 °
Load rating (RMS): 180 W
Peak power: 360 W
Frequency response: 65 - 19000 Hz
SPL (1W/1m): 93 dB
Max. SPL: 116 dB
Impedance: 8 Ohm(s)
Protection circuits: HF Driver
Loudspeaker inputs: 2
Speaker input connections: Speakon compatible , terminal block
Loudspeaker outputs: 1
Speaker output connections: terminal block
Cabinet material: 12 mm MDF
Cabinet surface: texture paint
Cabinet colour: Black
Cabinet construction: vented
Width: 200 mm
Height: 630 mm
Depth: 205 mm
Weight: 9,8 kg




Tuote on siirretty ostoskoriin